HT31 Dumbell Grip
HT31 Dumbell Grip
Dumbbell grips designed for flat rigid dumbbells. The prepared test piece, with an 8mm diameter hole drilled in each end, is located between two serrated dies. The dies are clamped on the test piece with a high tensile bolt.
This low force tensile grip is used on ST series materials testing machines.
Specifications
● Item# : 99-031-0000
● Maximum capacity: 20kN/4,000lbf
● Minimum loadcell: 50N/10lbf
● Serrated die diameter: 38mm/1.5in
● Bolt diameter: 7.9mm/0.31in
● Maximum specimen thickness: 6mm/0.23in
● Length each: 86mm/3.39in
● Weight each: 650g/1.43lb
● Temperature limits: -30-70°C
Applications
● Sheet metal dumbbell test pieces
● Plywood dumbbell test pieces
同类产品
我们的客户在说什么
-
友情链接
-
TAG标签