300kN Hydraulic Tensile Grip
These side loading hydraulic wedge grips (ref. 01036030) are used on high force electromechanical test frames and hydraulic test frames.
Applications
● Metal
● Other high force specimens
Specifications
● Maximum capacity: 300kN/60klbf
● Standard wedge width: 50mm/2in*
● Length each: 180mm/7.4in
● Weight each: 77kg/170lb
● Temperature limits: -40-175°C
● Required hydraulic pressure: 70MPa/10kps
*Alternate wedge widths available
Required accessories (see below)
● Hydraulic pumping unit
● Grip faces
● Alignment fixtures
Hydraulic pumping unit
Hydraulic pumping unit (ref. 01036002) with grip control for use with the 300kN grips (ref. 01036030).
Specifications
● Maximum pressure: 70MPa/10kpsi
● Minimum pressure: 10MPa /1.5kpsi
● Pressure stability: +/-100psi
● Weight: 76kg/170lb
● Temperature range: -40-177°C
Alignment fixture and grip faces
Alignment fixture (ref. 01036004)
This allows alignment adjustment to eliminate loading inconsistencies and inaccuracies that frequently occur during sample loading. It has a maximum capacity of 300kN/60klbf.
Wedge grip faces
These are used in the side loading hydraulic wedge grip body and are available in a variety of different shapes that best match the specimen profile.
Flat wedge specimens
Specimen thickness:
● 1-11.9mm/0.04-0.47in
● 6.1-17mm/0.24-0.67in
● 15-25.9mm/0.59-1.02in
Narrow wedge set
Wedge width: 50.8mm /2in
Wide wedge set
Wedge width: 101.6mm /4.00in
Round wedge specimens
Specimen diameter: 15,20,30mm/0.75,1.0,1.2in
Vee wedge specimens
Specimen diameter:
● 6.4-10.2mm/0.25-0.4in
● 10.7-16.8mm/0.42-0.66in
● 16.8-20mm/0.56-0.79in
我们的客户在说什么
-
友情链接
-
TAG标签