120kN Hydraulic Tensile Grip
These side loading hydraulic wedge grips (ref. 01036010) are used on high force electromechanical test frames and hydraulic test frames.
Applications
● Metal
● Other high force specimens
Specifications
● Maximum capacity: 120kN/30klbf
● Standard wedge width: 45mm/1.75in*
● Length each: 180mm/7.4in
● Weight each: 30kg/67lb
● Temperature limits: -40-175°C
● Required hydraulic pressure: 21MPa/3kpsi
*Alternate wedge widths available
Required accessories (see below)
● Hydraulic pumping unit
● Grip faces
● Alignment fixtures
Hydraulic pumping unit
Hydraulic pumping unit (ref. 01036001) with grip control for use with the 120kN grips (ref. 01036010).
Specifications
● Maximum pressure: 21MPa/3kpsi
● Minimum pressure: 0.7MPa/100psi
● Pressure stability: +/-100psi
● Weight: 76kg/170lb
● Temperature range: -40-177°C
Alignment fixture and grip faces
Alignment fixture (ref. 01036003)
This allows alignment adjustment to eliminate loading inconsistencies and inaccuracies that frequently occur during sample loading. It has a maximum capacity of 120kN/30klbf.
Wedge grip faces
These are used in the side loading hydraulic wedge grip body and are available in a variety of different shapes that best match the specimen profile.
Flat wedge specimens
Specimen thickness:
● 0-7.6mm/0-0.3in
● 7.1-14.2mm/ 0.28-0.56in
● 11.7-19.1mm/ 0.46-0.75in
Narrow wedge set
Wedge width: 44.5mm /1.75in
Wide wedge set
Wedge width: 76.2mm/3.00in
Round wedge specimens
Specimen diameter: 12,15,20mm/0.5,0.75,1.0in
Vee wedge specimens
Specimen diameter:
● 5.8-10.2mm/0.23-0.40in
● 10.9-12.8mm/0.43-0.5in
Narrow wedge set
Wedge width: 50.8mm /2in
Wide wedge set
Wedge width: 76.2mm/3.00in
Round wedge specimens
Specimen diameter: 12,15,20mm/0.5,0.75,1.0in
Vee wedge specimens
Specimen diameter:
● 5.8-10.2mm/0.23-0.40in
● 10.9-12.8mm/0.43-0.5in
我们的客户在说什么
-
友情链接
-
TAG标签