HW14 Wedge Grips
Self-tightening wedge grips. Wedges remain stationary when applying initial gripping force on the sample via the capstan, so avoiding excessive compression of the sample prior to test. Grips are supplied with cross-hatched jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections up to 20mm (8/10in).
The wedge style tensile grip is used on ST series materials testing machines.
Specifications
● Maximum capacity: 100kN/20,000lbf
● Minimum loadcell: 5kN/1,000lbf
● Gripping length: 75mm/3in
● Maximum sample width: 50mm/2in
● Maximum sample thickness: 12mm/0.5in
● Length each: 10mm/12.2in
● Weight each: 16kg/35lbf
● Temperature limits: -70-200°C
V profile jaw face options
● HW14R8 4-8mm/0.15-0.31in diameter
● HW14R15 5-15mm/0.2-0.6in diameter
● HW14R20 4-20mm/0.55-0.8in diameter
Applications
Suitable for gripping high strength rigid material in parallel or dumbbell form. Ideally the overall sample length should be greater than 200mm (8in).
我们的客户在说什么
-
友情链接
-
TAG标签